An IPv6 address has the form of eight hexadecimal numbers separated by colons. An example of an IPv6 address is: 2001:0db8:85a3:0000:0000:8a2e:0370:7334
To create a network, go to:
You can assign a float group to the network. Read more on Float group.
Additionally, you can select the priority; this has a value between 0 and 10 that is considered.
To configure a subnet, select the network.
Inside this section, you have the option to create a subnet or multiple subnets.
Select the mask for the subnet that the user will use and assign the user that will be the owner of the subnet.
After you create the subnet, you can assign a user and add a tag.
To create multiples subnet go to:
To add the IPs is through a range of IP using both forms field. The first one for the initial IP of the Network and the second field for the last one. For example, 192.168.1.0 to 192.168.1.255
Select the range of IPs to create the subnet, the mask and sub mask, user, and task.
After you create the subnet, you will find two more options to add a DNS reverse and a tag.
To delete a subnet,